Vehicle Smong-testing Equipment

Model Number

OPA-101

• Type Approval No. OED-2006-04
• Built-In LED Display Window
• Approximately 6-Minutes of Preheat Time
• RPM Sensor (Battery/Cigar Jack)
• PC Program Included (RS-232C)

Target Subject	Smoke opacity, Smoke Dencity, RPM(option)
LED Type	Green LED(565nm)
Exit Carrier	Photodiode
Cell Length:Internal Diameter	Length: 215mm , Internal Diameter: 21mm
Cell Temperature	Maintains Approx. 80°C
Analysis Range	S m o k e	0.0~100.0%	Absorption Coefficient	0.00~21.42m-1	R P M	0~8000rpm
Resolving Power		0.1%		0.01m-1		10rpm
Display		4digit 7segment LED		4digit segment LED		4digit segment LED
Repetition Rate	Within 1%
Accuracy	Within ±1% (RPM :±80rpm)
Response Time	0.5 second (90% of the time)
Smoke Testing Speed	60 times/second
Smoke Density Display	4 times/second
Data Transfer	RS232 Application, 4 times/second (refer to the protocol)
Preheat Time	Approx. 6 minutes
Filter	0.5 second Besel Low Pass Digital Filter
Voltage Use	220V AC / 110V AC 50/60Hz
Power Consumption	Approx. 50W
Category Temperature	-10~40°C
Size	400(W) x 170(D) x 200 (H) mm (Except the Table)
Weight	Approx. 5kg
Probe Length	760mm
Probe Internal Diameter: Disparity	Internal Diameter: 10mm Disparity: higher than 10mm
Optional Accessory	RPM Sensor ( Battery Type)
Included Accessories	Probe, Power Cord, Instruction Manual, and Type Approval Certificate